Last updated: September 2026 · By Matt, founder of Preset Curator
Mixed lighting in real estate photos happens when warm indoor bulbs (around 2700–3000K) and cool daylight from windows (around 5500–6500K) light the same room. The camera can only pick one white balance, so part of the room turns orange or blue. To fix mixed lighting in real estate photos in Lightroom, set a global white balance for the daylight, then use masks and Point Color to neutralize the warm areas locally.
Mixed lighting is one of the most common reasons listing photos look “off” to buyers, even when they can’t say why. Walls that should be white look yellow near lamps and blue near windows. Here’s the exact process I use, plus how presets speed it up.


Why does mixed lighting ruin real estate photos?
Buyers judge a home by its photos first. In the National Association of REALTORS® Real Estate in a Digital Age report (2018), 87% of buyers who searched online found photos very useful. Color casts make white walls look dirty, cabinets look dated, and rooms feel smaller. They also make a listing gallery look inconsistent, because every room ends up a different temperature.
What color temperature is each light source?
| Light source | Typical color temperature | How it looks in photos |
|---|---|---|
| Incandescent / warm LED bulbs | 2700–3000K | Orange or yellow walls |
| “Cool white” LEDs and fluorescent tubes | 3500–4100K | Slightly green or neutral |
| Direct daylight through windows | 5500–6500K | Neutral to slightly blue |
| Open shade and overcast sky | 6500–7500K | Blue floors and window frames |
Step 1: Prevent it on shoot day
- Turn off lamps and overheads that aren’t needed. Daylight-only rooms are the easiest to edit.
- If lights must stay on (to show fixtures), shoot one bracket with them on and one with them off, then blend.
- Shoot RAW. JPEG bakes in white balance and you can’t cleanly recover it.
- Bracket exposures (3–5 frames) so you keep window detail. For gear, see our guide to the best Sony wide-angle lenses for real estate.
Step 2: Set a global white balance for daylight
- In Lightroom’s Develop module, pick the White Balance Selector (the eyedropper, shortcut W).
- Click a neutral white or light gray surface lit by window light, such as a ceiling near the window or white trim.
- Fine-tune Temp and Tint until the window-lit walls look clean white.
Daylight usually covers most of the frame, so it should be your base. The lamp areas will now look even warmer. That’s expected, and you’ll fix them next.
Step 3: Neutralize warm spots with masks
- Open Masking and choose Brush (or Radial Gradient for pools of lamp light).
- Paint over the orange areas: walls next to lamps, ceilings under pot lights.
- Inside the mask, drag Temp toward blue and adjust Tint until the wall matches the rest of the room.
- Lower Saturation slightly in the mask to kill leftover orange.
Tip: Keep the lamp itself slightly warm. A perfectly neutral lamp looks fake. Buyers expect a bulb to glow warm.
Step 4: Target stubborn casts with Point Color
When orange spill covers large parts of the room, use the Color Mixer panel (called HSL/Color in older Lightroom Classic versions).
- Point Color: click the eyedropper, sample the orange wall, then lower Saturation and nudge Hue toward yellow. Use the Range slider to keep wood floors and cabinets untouched. Point Color also works inside a mask, which is the most precise fix for one problem wall.
- HSL (Mixer tab): for a quick global fix, lower Orange and Yellow Saturation by 10–25. Lower Blue Saturation slightly if window light casts blue on floors. HSL is global only, so it isn’t available inside masks.
- Check wood floors and cabinets afterward. Don’t desaturate them until they look gray.
Step 5: Recover windows and exterior views
Brush over the windows (or use Select Sky when the sky is visible) and lower Highlights and Exposure to recover the view. If the view outside is blue from shade, warm it slightly so it doesn’t clash with the room.
Step 6: Sync the look across the whole listing
Once one room looks right, select the other photos from the same shoot and use Sync Settings (Lightroom Classic) or Copy and Paste Edit Settings (Lightroom desktop). Sync the global settings only, not the masks, then adjust white balance per room. A gallery where every room shares the same whites looks far more professional.
How presets speed up mixed-lighting fixes
Doing this for 30–40 photos per listing takes time. A good real estate preset handles the global part: neutral whites, lifted shadows, and controlled orange and yellow saturation. You’re left with only the local mask touch-ups.

Our Real Estate Lightroom Presets include 34 presets across four tone collections (Pure Tone, Soft, Dark and Luxe), plus a 12-preset studio kit for final adjustments like white balance and warmth. They work in Lightroom Classic, Lightroom desktop and Lightroom Mobile (XMP and DNG files included). The pack is rated 4.84/5 from over 2,500 reviews.
→ Get the Real Estate Lightroom Presets
Quick checklist: mixed lighting fix
| Problem | Lightroom fix |
|---|---|
| Whole room too orange | White Balance Selector on a window-lit white surface |
| Orange walls near lamps | Brush mask → Temp toward blue, lower Saturation |
| One stubborn orange wall | Mask + Point Color → sample the wall, lower Saturation |
| Blue cast near windows | Brush mask → Temp toward yellow |
| Orange spill everywhere | Color Mixer → lower Orange/Yellow Saturation |
| Blown-out windows | Brush or Select Sky → lower Highlights/Exposure |
| Rooms don’t match each other | Sync Settings (global only), then tweak white balance |
Frequently asked questions
What is mixed lighting in real estate photography?
Mixed lighting is when light sources with different color temperatures, usually warm tungsten bulbs and cool daylight, light the same room. The camera can only set one white balance, so parts of the image look orange or blue.
Should I turn the lights on or off for real estate photos?
Turn off lights you don’t need to show. Keep on the fixtures that are selling points, like pendants or chandeliers, and fix their color spill with masks in Lightroom.
What is the fastest way to fix orange walls in Lightroom?
Use Point Color in the Color Mixer panel. Sample the orange wall with the eyedropper, then lower Saturation and shift Hue slightly toward yellow. Point Color also works inside a mask, so you can limit it to one wall.
Can a Lightroom preset fix mixed lighting automatically?
A preset fixes the global color balance and tone in one click, which handles most of the work. Strong local casts from lamps still need a quick brush mask.
Do real estate presets work on Lightroom Mobile?
Yes. Preset Curator’s Real Estate Lightroom Presets include DNG files for Lightroom Mobile on iOS and Android, plus XMP files for desktop.

